Multi-Position Electromantle Integral Control- 6x100ML 230V

MULTI-POSITION ELECTROMANTLE INTEGRAL CONTROL- 6X100ML 230V

  • Brand: Electrothermal
  • SKU: 166-2109
  • County of Origin: UNITED KINGDOM
  • Product Code: EME60100/CEB
  • Availability: In Stock
  • Speak to our Expert 1800 103 6641

Multi-Position Electromantle Integral Control- 6x100ML ELECTROMANTLE 230V UK AND EU PLUGS

Features

1. The Multi (Extraction) Mantle with six recesses has a built-in electronic controller and offers a choice of heater only (EME6) or heater/stirrer (EMEA6) combination models. 

2. For both Heater EME6 and Heater/Stirrer EMEA6 models

  • Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
  • Three 12.7mm diameter support rods are included        
  • Round bottom flask capacity.
  • Top cover is polypropylene and external surfaces are powder coated giving good general chemical resistance   
  • Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support
  • Earth (ground) screen encloses the heater for added safety
  • Individual heater cartridges are replaceable
  • Neon lights indicate when power is on and supplied to heaters and, if applicable, supplied to stirrers
3. Additional Features for Heater/Stirrer EMEA6 models

  • Allow the solution to be stirred and heated simultaneously
  • Provide stirring speeds of between 50 to 1000 rpm
  • One stirring control operates each set of three recesses
Technical Specification

Flask Capacity 6 x 100 ml
Dimension ( D x W x H) 270 x 1210 x 110 mm
No. Of Recesses
MaterialPolypropylene top on powder coated aluminium
Max. Temp450°C
Shipping Weight10.1 Kg
Electrical Requirement 
230v 50/ 60Hz, 420W UK and EU plug






Write a review

Note: HTML is not translated!
    Bad           Good